Onkyo PR-SC5508 Owner Manual - Page 47

Digital Audio Input If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign "OPT 1" to the "TV/CD" input selector. Here are the default assignments. Input selector BD/DVD VCR/DVR CBL/SAT GAME PC AUX TAPE TUNER TV/CD PHONO PORT Default assignment COAX 1 COAX 2 COAX 3 OPT 1 ----FRONT (Fixed Fixed) OPT 2 --------- ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, TAPE, TV/CD, PHONO, PORT `COAX 1, COAX 2, COAX 3, OPT 1, OPT 2, OPT 3: Select a corresponding digital audio input that the component has been connected Select if the component is connected to an analog audio input. • "AUX" is used only for input from the front panel. Note • When an HDMI IN is assigned to an input selector in "HDMI Input" (➔ 45), the same HDMI IN will be set as a priority in this assignment. In this case, if you want to use the coaxial or optical audio input, make the selection in the "Audio Selector" in the Home menu (➔ 64). • Available sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit. • "TUNER" selector cannot be assigned and is fixed at the option. • If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to "PORT" selector. Analog Audio Input If you connect a component to the AV controller's analog multichannel input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/ DVD player to the MULTI CH input, you must assign it to the "BD/DVD" input selector. If you connect a component to the AV controller's balanced input, you must assign that input to an input selector. For example, if you connect your CD player to the balanced input, you must assign it to the "TV/CD" input selector. ■ Multich ` BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX, TAPE, TV/CD, PHONO: You can assign the multichannel input to the input selectors If you don't want to assign the multichannel input, set to Note • To listen to the component connected to the multichannel input, make the selection in the "Audio Selector" in the Home menu (➔ 64). Subwoofer Input Sensitivity ` 0dB to 15dB in 5 dB step. Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal. With this setting, you can change the AV controller's subwoofer sensitivity to match your DVD player. Note • This setting only affects signals connected to the AV controller's multichannel input SUBWOOFER jack. • If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting. • This setting cannot be selected when is selected in the "Multich" setting. ■ Balance ` BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX, TAPE, TV/CD, PHONO: You can assign the balanced input to the input selectors If you don't want to assign the balanced input, set to Input Channel ` Mono(L): Select if the source is mono and you've connected it to the BALANCE L INPUT jack. ` Stereo: Select if the source is stereo and you've connected it to the BALANCE L/R INPUT jacks. En 47