Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 106
continued, 2-9 OPTION MODE
![]() |
UPC - 791871302781
View all Panasonic AJ-HDX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 7 Menu description tables (continued) 7-2-9 OPTION MODE Item REC TALLY CUF P.OFF GPS DATA CUF 1394 SPEED CUF 1394 IN CH CUF 1394 OUT CH CUF 1394 CONTROL CUF 1394 CMD SEL CUF SDI METADATA CUF SDI EDH CUF Variable range RED GREEN CHAR HOLD CLEAR S200 S400 0 : 63 AUTO 0 : 63 AUTO OFF BOTH REC_P STOP ON OFF ON OFF Remarks For selecting the method to access records on the unit when the unit is connected to peripheral devices and used remotely. RED: The red tally lamp lights. GREEN: The green tally lamp lights. CHAR: For displaying "REC" in the viewfinder. For selecting whether or not to hold the UMID GPS position information while the power is off and record the information as the data still held as the previous value until another measurement can be taken after the power is next turned on. HOLD: The data is held and recorded. CLEAR: The data is cleared at the same time as the power is turned off, and all zeros (no information) are recorded from the time the power is turned on until the measurement is next taken. For setting the transfer rate of signals output from the DVCPRO connector. S200: 200 Mbps S400: 400 Mbps For setting the input channel of signals input to the DVCPRO connector. 0 - 63: To fix to the designated value AUTO: To follow the settings of the externally connected devices For setting the input channel of signals output from the DVCPRO connector. 0 - 63: To fix to the designated value AUTO: To follow the settings of the externally connected devices For setting the control for recording start/stop operations of external devices that are connected to the DVCPRO connector. OFF: Do not control the externally connected devices. BOTH: To control both the unit and the externally connected devices For setting the control of recording stop operations of the external devices that are connected to the DVCPRO connector. REC_P: Operation to pause recording STOP: Stopping operation For setting metadata (UMID information) to output to the HD SDI signals. ON: To output OFF: Not to output For setting that the detection signals of the communication error is output to the HD SDI signals. ON: To output OFF: Not to output The underlining in the variable range column indicates the setting in the preset mode. 106
![](/manual_guide/products/panasonic-ajhdx900-dvcpro-hd-camera-6b13c28/106.png)