Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 56
Display modes and setting, changes/adjustment result messages, continued
UPC - 791871302781
View all Panasonic AJ-HDX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 4 Adjustments and settings for recording (continued) 4-7-4 Display modes and setting changes/adjustment result messages By setting the display mode item, it is possible to select various display methods for the changes made in the settings and for the messages advising the user of the adjustment results: for instance, the items displayed can be limited to a select number or not displayed at all. To select the display mode, perform menu operations to open the screen from the VF page and select the setting for the DISP MODE item. For details on operation, refer to "4-6-2 Basic menu operations." #< VF DISPLAY > DISP CONDITION DISP MODE VF OUT VF DTL ZEBRA1 DETECT ZEBRA2 DETECT ZEBRA2 LOW LIGHT LVL RC MENU DISP. MARKER/CHAR LVL :NORMAL :3 :Y :3 :070% :085% :SPOT :35% :ON :50% Setting change/adjustment result messages and display modes Situation in which message is displayed Message When the filter selection has been changed CC: n (n=1, 2, 3, 4) or ND: m (m=A, B, C, D) When the gain setting has been changed GAIN: n dB (n= -3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30) When the WHITE BAL switch setting has been changed WHITE: n (n=ACH, BCH, PRESET) When the OUTPUT/AUTO KNEE switch has been set AUTO KNEE: ON (or OFF) to AUTO KNEE or OFF When the shutter speed/mode setting has been changed SS: 1/60 (or 1/120, 1/250, 1/500, 1/1000, 1/2000, 1 1/¢¢¢¢) When the white balance (AWB) has been adjusted Example) AWB A OK 3.2K When the black balance (ABB) has been adjusted Example) ABB OK When the extender has been selected Example) EXTENDER ON When a user button has been selected Example) UM: S.GAIN 30 dB When a marker select button has been selected Example) MKR: A When in iris overwrite status Example) ++ F 5.6 Display mode setting 123 µ: Message is to be displayed. ≤: Message is not to be displayed. 4-7-5 Setting the marker displays ON, OFF or the display type can be selected for the displays of the center marker, safety zone markers, safety zone area and frame marker. To make the selection, perform menu operations to open the screen from the VF page and select the display mode for each item. For details on operation, refer to "4-6-2 Basic menu operations." #< VF MARKER > TABLE CENTER MARK SAFETY ZONE SAFETY AREA FRAME SIG FRAME MARK FLAME LVL :A :1 :2 :90% :4:3 :OFF :15 MKR:A 4-7-6 Setting the camera ID The camera ID is set on the CAMERA ID screen. Up to ten alphanumerics, symbols and spaces can be used. The camera ID is not displayed while the setting menu is displayed even if color bar signals are output. 1 Perform a menu operation to open the screen from the OPERATION page. #< CAMERA ID > ID1 : ABCDEFGHIJ ID2 : ABCDEFGHIJ ID3 : ABCDEFGHIJ The MKR: A indication at the upper right of the screen shows the display status. To check the settings for TABLE B, press the MARKER SELECT so that MKR:B is displayed. 2 Turn the JOG dial button to move the arrow (cursor) to the "ID 1: to 3:" item. 56