Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 130
continued, 8-7 TC/UB
![]() |
UPC - 791871302781
View all Panasonic AJ-HDX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Chapter 7 Menu description tables (continued) 7-8-7 TC/UB Item TC MODE CUF UB MODE CUF VITC UB MODE CUF Variable range Remarks DF NDF USER TIME DATE EXT TCG FRM RATE REGEN USER/EXT TIME DATE TCG FRM RATE REGEN For selecting the mode advancing the time code. DF: Drop frame NDF: Non-drop frame When the system frequency is set to 50 Hz, the mode is the non-drop frame mode. For selecting the users bits to record in the LTC area. USER: For recording the user setting values. (fixed values) TIME: For recording the local time. (hour, minute, second) DATE: For recording the local date and time. (2 digits for year, month, day, time) EXT: For recording the users bits of the time code input in the TC IN connector. If the users bits cannot be read, the user setting values are recorded. TCG: For recording the value of the time code generator. FRM RATE: For recording the shooting information (frame rate etc.) of the camera. REGEN: For reading the value recorded on the tape and recording the value continuously. When the recording format is set to 720P, it follows the settings of FRAME RATE UB in 7-9-1 screen. For selecting the users bits to record in the VITC area. USER/EXT: When the UB MODE item is set to EXT, the users bits of the time core input in the TC IN connector is recorded. If it is set to any option other than EXT, the user setting value is recorded. TIME: For recording the local time. (hour, minute, second) DATE: For recording the local date and time. (2 digits for year, month, day, time) TCG: For recording the value of the time code generator. FRM RATE: For recording the shooting information (frame rate etc.) of the camera. REGEN: For reading the value recorded on the tape and recording the value continuously. When the video system is set to 24P or 24PA, or when the recording format is set to 720P, it follows the settings of FRAME RATE UB in 7-9-1 screen. Item TCG SET HOLD CUF FIRST REC TC CUF P.OFF LCD DISPLAY CUF TC OUT CUF TC DISP SEL CUF TC VIDEO SYNCRO CUF REC REVIEW REGEN CUF Variable range ON OFF REGEN PRESET ON OFF TCG TCG/TCR 30F 24F 0 1 2 3 ON OFF Remarks For selecting ON or OFF for the function that without fail uses what was previously set as the TCG value for recording when the TCG value had been set before the power was turned off and recording was then performed after the power was turned back on again. For selecting whether or not to regenerate the time code as the value on the tape during the first recording after the power was turned on, the cassette was inserted or a playback or search operation was performed. For selecting whether or not to set the LCD's time code and display its count while the power is off. ON: The time code can be set and displayed even while the power is off. OFF: While the power is off, the power to the LCD section is turned off, and the time code can be neither set nor displayed. For selecting the time code to be output to the TC OUT connector. TCG: The time code generator value is always output. TCG/TCR: In the EE mode, the time code generator value is output from the connectors; in the playback mode, it is the time code reader value which is output. For selecting the display format to be used for the frame digits of the time code. 30F: A number up to 30 frames is indicated in frame digits of the time code. 24F: A number up to 24 frames is indicated in frame digits of the time code. When the system frequency is set to 50 Hz, 25 frames are displayed. For setting to correct the time code according to the delay of video signals. 0: Do not correct. 1: To delay the time code to be input according to the timing of the video images. 2: To forward the time code to be output according to the timing of the video images. 3: To delay the time code to be input and forward the time code to be output, respectively, according to the timing of the video images. For details, refer to "4-5-4 Externally locking the time code". For selecting whether the time code is regenerated to the value on the tape or not, when subsequent recording starts after setting the RET SW item on the SW MODE screen to R.REVIEW and pressing the RET button on the lens or the USER button on the unit on which the RET SW function is assigned. ON: The time code is regenerated to the value on the tape. OFF: The time code is not regenerated. The underlining in the variable range column indicates the setting in the preset mode. 130
![](/manual_guide/products/panasonic-ajhdx900-dvcpro-hd-camera-6b13c28/130.png)