Home » Panasonic Manuals » Video Cameras » Panasonic AJ-HDX900 » Manual Viewer

Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 132

Specifications - weight

UPC - 791871302781

View all Panasonic AJ-HDX900 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 132 highlights

Chapter 8 Specifications [GENERAL] Power supply: DC 12 V (DC 11.0 V - 17.0 V) Power consumption: 36 W indicates safety information. Ambient operating temperature: 0°C to +40°C (32°F to 104°F) Storage temperature: -20°C to +60°C (-4°F to 140°F) Ambient operating humidity: Within 10% to 85% (relative humidity) Continuous operation time: Approx. 120 min. (using the DIONIC90 made by Anton/Bauer) Dimensions (WaHaD): 129 mma271 mma329 mm (5-1/8 inchesa10-11/16 inchesa13 inches) Weight: Approx. 4.5 kg (9.9 lb) (main unit only) [CAMERA UNIT] Image sensor: 2/3-inch CCD a3 Shooting method: RGB 3-CCD method Total number of pixels: 1370 (H) k 744 (V) Effective number of pixels: 1280 (H) k 720 (V) Horizontal drive frequency: 74.1758 MHz (59.94 Hz) 74.25 MHz (50 Hz) Lens mount: 2/3-inch Bayonet type Optical system: F1.4 prism system CC/ND Filter: CC A: CROSS B: 3200 K C: 4300 K D: 6300 K ND 1: CLEAR 2: 1/4ND 3: 1/16ND 4: 1/64ND Quantizing: 14 bits Sampling frequency: 74.1758 MHz (59.94 Hz) 74.25 MHz (50 Hz) Digital signal processing: 74.1758 MHz (59.94 Hz) 74.25 MHz (50 Hz) Programmable gain values: -3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB, 21 dB, 24 dB, 27 dB and 30 dB DS GAIN function: +6 dB, +10 dB, +12 dB, +15 dB, or +20 dB gain increase selectable LINE MIX GAIN function +6 dB (can be set to ON or OFF) SUPER GAIN function: 30 dB or 36 dB selectable Shutter speeds: 1/60 (50 Hz), 1/100 (59.94 Hz), 1/120, 1/250, 1/500, 1/1000, 1/2000 and HALF Synchro scan shutter: 1/60.3 to 1/249.8 (1080-59.94i/720-59.94P) 1/30.2 to 1/249.8 (1080-29.97P/720-29.97P) 1/24.1 to 1/249.8 (1080-23.98P/1080-23.98PA/720-23.98P) 1/50.2 to 1/209.5 (1080-50i/720-50P) 1/25.2 to 1/209.5 (1080-25P/720-25P) Sensitivity: F10 (2000 lx, 89.9% reflection) Minimum subject brightness: 0.032 lx, F1.4, 36 dB (S. GAIN) +20 dB (DS. GAIN) +6 dB (LINE MIX) Video signal-to-noise ratio: 54 dB (typical) Registration error: Less than 0.03% (entire area, excluding lens distortion) [VTR UNIT] Tape Transport System Tape to be used: M cassette tape for 1/4-inch DVCPRO Tape speed: 67.640 mm/s (59.94 Hz) 67.708 mm/s (50 Hz) Recording time: 33 minutes (when AJ-HP33EMG is used) Fast forwarding time: Approx. 1 min. 30 sec. (when AJ-HP33EMG is used) Rewinding time: Approx. 1 min. 30 sec. (when AJ-HP33EMG is used) Video System Sampling frequency: Y: 74.1758 MHz (59.94 Hz) 74.25 MHz (50 Hz) PB/PR: 37.0879 MHz (59.94 Hz) 37.125 MHz (50 Hz) Quantizing: 8 bits Video compression system: DCT + variable-length code Video compression ratio: 1/6.7 (other than 1080-50i/1080-25P) 1/6.3 (in case of 1080-50i/1080-25P) Error correction: Reed-Solomon product code Video recording bit rate: 100 Mbps 132

Section	Page
Read this first!	2
Contents	5
Chapter 1 General	7
1-1 Features of the camera unit	7
1-2 Features of the VTR unit	8
1-3 Features of the Input/Output unit	8
1-4 Other features	9
1-5 Dimensions drawing	9
1-6 System configuration	10
Chapter 2 Parts and their functions	11
2-1 Power supply and accessory mounting section	11
2-2 Audio function section	12
2-3 Shooting and recording/playback function section	14
2-4 Menu operation section	17
2-5 Time code related section	18
2-6 Warning/status display section	19
2-7 Display window and its displays	19
2-8 Viewfinder section	21
Chapter 3 Recording and playback	22
3-1 Cassette tapes	22
3-2 Basic procedures	23
3-3 Scene-to-scene continuity	25
3-4 To record video signals of a few seconds before starting recording (PRE-RECORDING function)	26
3-5 Recording in intervals (INTERVAL REC function)	27
3-6 To take the previous cut again (RETAKE function)	29
3-7 To check the last few seconds of the recording (Rec-review function)	29
3-8 Normal playback and playback at different speeds	29
Chapter 4 Adjustments and settings for recording	30
4-1 Multi Format	30
4-1-1 Video system and Recording format	30
4-1-2 Recording format on tapes and signal format at output connector	31
4-2 Adjusting the white balance and black balance	32
4-2-1 Adjusting the white balance	32
4-2-2 Adjusting the black balance	34
4-3 Setting the electronic shutter	35
4-3-1 Shutter modes	35
4-3-2 Setting the shutter mode and speed	36
4-3-3 Setting the synchro scan mode	36
4-4 Selecting the audio input signals and adjusting their recording levels	37
4-4-1 Selecting the audio input signals	37
4-4-2 Adjusting the audio signal recording levels	37
4-4-3 CH3 and CH4 recording levels	38
4-5 Setting the time data	38
4-5-1 Setting the user bits	38
4-5-2 Setting the internal clock’s date and time	42
4-5-3 Setting the time code	43
4-5-4 Externally locking the time code	43
4-5-5 Setting the UMID information	47
4-6 Menu displays on the viewfinder screen	48
4-6-1 Menu configuration	48
4-6-2 Basic menu operations	48
4-6-3 Selecting the user menus	49
4-7 Viewfinder screen status displays	50
4-7-1 Viewfinder lamp displays	50
4-7-2 Viewfinder screen status display configuration	50
4-7-3 Selecting the viewfinder screen display items	50
4-7-4 Display modes and setting changes/adjustment result messages	56
4-7-5 Setting the marker displays	56
4-7-6 Setting the camera ID	56
4-7-7 Mode check screen displays (MODE CHECK button function)	57
7-8 Marker check screen displays (MARKER SELECT button function)	57
4-8 Selection of video output signals	58
4-8-1 Settings of signals output from VIDEO OUT connector	58
4-8-2 Settings of signals output from MON OUT connector	60
4-9 Menu-driven function setup	61
4-9-1 Setting the USER SW GAIN switching	61
4-9-2 Selecting the F.AUDIO LEVEL control function	61
4-9-3 Allocating functions to the USER MAIN, USER1 and USER2 buttons	62
4-9-4 Setting the color temperature manually	63
4-10 Set data handling	64
4-10-1 Handling the setup card	65
4-10-2 Setup card operations	65
4-10-3 How to use the user data	69
4-10-4 How to use the scene file data	70
4-10-5 Method for returning to user settings	73
4-10-6 Method for returning to the factory settings	73
4-10-7 Lens file	74
4-10-8 How to provide lens files	74
4-10-9 To save the lens file into the built-in memory	75
4-10-10 To read the lens file from the builtin memory	77
4-10-11 To write in and read out the lens file to/from the SD memory card	78
Chapter 5 Preparation	80
5-1 Supplying the power	80
5-1-1 Attaching the battery and setting the battery type	80
5-1-2 Use of the external DC power supply	82
5-2 Attaching the lens and adjusting the flange back	83
5-3 Adjusting the white shading of the lens	84
5-4 Audio input signal preparations	86
5-4-1 When using the front microphone	86
5-4-2 When using a wireless receiver	86
5-4-3 When using an audio component	87
5-5 Mounting the unit on a tripod	87
5-6 Attaching the shoulder belt	88
5-7 Adjusting the position of the shoulder pad	88
5-8 Attaching the rain cover	88
5-9 Attaching the FRONT AUDIO LEVEL control knob	88
5-10 Connection of the remote control unit (AJ-RC10G)	89
5-11 Connection of the external switch	89
Chapter 6 Maintenance and inspections	90
6-1 Inspections prior to shooting	90
6-1-1 Preparation for inspections	90
6-1-2 Inspecting the camera unit	90
6-1-3 Inspecting the VTR unit	91
6-1-4 Self-diagnosis function	92
6-2 Maintenance	93
6-2-1 Condensation	93
6-2-2 Head cleaning	93
6-2-3 Cleaning inside the viewfinder	93
6-2-4 Phenomena inherent to CCD cameras	93
6-2-5 Replacing the backup battery	93
6-2-6 Connectors and signals	94
6-3 Warning system	98
6-3-1 Warning description tables	98
6-3-2 Error codes	100
6-3-3 Emergency eject	100
Chapter 7 Menu description tables	101
7-1 Menu configuration	101
7-2 SYSTEM SETTING	102
7-2-1 SYSTEM MODE	102
7-2-2 REC FUNCTION	102
7-2-3 OUTPUT SEL	103
7-2-4 VIDEO OUT SETTING	103
7-2-5 MONITOR OUT SETTING	104
7-2-6 RC OUT SETTING	104
7-2-7 DOWNCON SETTING	105
7-2-8 GENLOCK	105
7-2-9 OPTION MODE	106
7-3 PAINT	107
7-3-1 RB GAIN CONTROL	107
7-3-2 RGB BLACK CONTROL	107
7-3-3 MATRIX	108
7-3-4 COLOR CORRECTION	108
7-3-5 LOW SETTING	109
7-3-6 MID SETTING	110
7-3-7 HIGH SETTING	110
7-3-8 ADDITIONAL DTL	111
7-3-9 SKIN TONE DTL	112
7-3-10 KNEE/LEVEL	113
7-3-11 GAMMA	113
7-3-12 CAMERA SETTING	114
7-4 VF	115
7-4-1 VF DISPLAY	115
7-4-2 VF MARKER	116
7-4-3 VF USER BOX	116
7-4-4 VF INDICATOR1	117
7-4-5 VF INDICATOR2	117
7-4-6 MODE CHECK IND	118
7-4-7 !LED	118
7-5 OPERATION	119
7-5-1 CAMERA ID	119
7-5-2 SHUTTER SPEED	119
7-5-3 SHUTTER SELECT	119
7-5-4 USER SW	120
7-5-5 SW MODE	121
7-5-6 WHITE BALANCE MODE	121
7-5-7 USER SW GAIN	122
7-5-8 LENS/IRIS	122
7-6 FILE	123
7-6-1 CARD READ/WRITE	123
7-6-2 CARD R/W SELECT	123
7-6-3 LENS FILE	123
7-6-4 LENS FILE CARD R/W	123
7-6-5 SCENE	123
7-6-6 INITIALIZE	124
7-7 MAINTENANCE	124
7-7-1 SYSTEM CHECK	124
7-7-2 DIAGNOSTIC	124
7-7-3 LENS ADJ	124
7-7-4 BLACK SHADING	125
7-7-5 WHITE SHADING	125
7-7-6 LENS FILE ADJ	125
7-8 VTR MENU	126
7-8-1 VTR FUNCTION	126
7-8-2 BATTERY/TAPE	126
7-8-3 BATTERY SETTING1	127
7-8-4 BATTERY SETTING2	128
7-8-5 MIC/AUDIO1	129
7-8-6 MIC/AUDIO2	129
7-8-7 TC/UB	130
7-8-8 UMID SET/INFO	131
7-8-9 VTR DIAG	131
7-9 OPTION MENU	131
7-9-1 OPTION	131

Match case Limit results 1 per page

132

Chapter 8

Specifications

Power supply:

DC 12 V (DC 11.0 V - 17.0 V)

Power consumption:

36 W

indicates safety information.

[GENERAL]

Ambient operating temperature:

0°C to +40°C (32°F to 104°F)

Storage temperature:

–20°C to +60°C (–4°F to 140°F)

Ambient operating humidity:

Within 10% to 85% (relative humidity)

Continuous operation time:

Approx. 120 min. (using the DIONIC90 made by

Anton/Bauer)

Dimensions (W

D):

129 mm

271 mm

329 mm

(5-

inches

10-

inches

13 inches)

Weight:

Approx. 4.5 kg (9.9 lb)

(main unit only)

[CAMERA UNIT]

Image sensor:

2/3-inch CCD

Shooting method:

RGB 3-CCD method

Total number of pixels:

1370 (H)

744 (V)

Effective number of pixels:

1280 (H)

720 (V)

Horizontal drive frequency:

74.1758 MHz (59.94 Hz)

74.25 MHz (50 Hz)

Lens mount:

2/3-inch Bayonet type

Optical system:

F1.4 prism system

CC/ND Filter:

A: CROSS

B: 3200 K

C: 4300 K

D: 6300 K

1: CLEAR

2: 1/4ND

3: 1/16ND

4: 1/64ND

Quantizing:

14 bits

Sampling frequency:

74.1758 MHz (59.94 Hz)

74.25 MHz (50 Hz)

Digital signal processing:

74.1758 MHz (59.94 Hz)

74.25 MHz (50 Hz)

Programmable gain values:

–3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB,

21 dB, 24 dB, 27 dB and 30 dB

DS GAIN function:

+6 dB, +10 dB, +12 dB, +15 dB, or +20 dB gain increase

selectable

LINE MIX GAIN function

+6 dB (can be set to ON or OFF)

SUPER GAIN function:

30 dB or 36 dB selectable

Shutter speeds:

1/60 (50 Hz), 1/100 (59.94 Hz), 1/120, 1/250, 1/500,

1/1000, 1/2000 and HALF

Synchro scan shutter:

1/60.3 to 1/249.8 (1080-59.94i/720-59.94P)

1/30.2 to 1/249.8 (1080-29.97P/720-29.97P)

1/24.1 to 1/249.8

(1080-23.98P/1080-23.98PA/720-23.98P)

1/50.2 to 1/209.5 (1080-50i/720-50P)

1/25.2 to 1/209.5 (1080-25P/720-25P)

Sensitivity:

F10 (2000 lx, 89.9% reflection)

Minimum subject brightness:

0.032 lx, F1.4, 36 dB (S. GAIN) +20 dB (DS. GAIN)

+6 dB (LINE MIX)

Video signal-to-noise ratio:

54 dB (typical)

Registration error:

Less than 0.03% (entire area, excluding lens distortion)

[VTR UNIT]

Tape Transport System

Tape to be used:

M cassette tape for 1/4-inch DVCPRO

Tape speed:

67.640 mm/s (59.94 Hz)

67.708 mm/s (50 Hz)

Recording time:

33 minutes (when AJ-HP33EMG is used)

Fast forwarding time:

Approx. 1 min. 30 sec. (when AJ-HP33EMG is used)

Rewinding time:

Approx. 1 min. 30 sec. (when AJ-HP33EMG is used)

Video System

Sampling frequency:

74.1758 MHz (59.94 Hz)

74.25 MHz (50 Hz)

37.0879 MHz (59.94 Hz)

37.125 MHz (50 Hz)

Quantizing:

8 bits

Video compression system:

DCT + variable-length code

Video compression ratio:

1/6.7 (other than 1080-50i/1080-25P)

1/6.3 (in case of 1080-50i/1080-25P)

Error correction:

Reed-Solomon product code

Video recording bit rate:

100 Mbps