Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 12
Audio function input system - settings
UPC - 791871302781
View all Panasonic AJ-HDX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 2 Parts and their functions (continued) 2-2 Audio function section (input system) =< > ; : 3 7 2 6 1 8 ? 4 @ 59 1 MIC IN (microphone input) jack (XLR, 5-pin) Connect the microphone (optional accessory) here. The power for the microphone is supplied from this jack. Components of 150 Hz are removed from the signals input from this connector. 2 AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 recording level adjustment) controls When the AUDIO SELECT CH1/CH2 switch 3 is set to MAN, the recording level of audio channels 1 and 2 can be adjusted using these controls. The controls come with a locking mechanism. Therefore, to adjust the recording level, simultaneously push in and turn the controls. 3 AUDIO SELECT CH1/CH2 (audio channel 1 & 2 automatic/manual level adjustment selector) switch This is used to select the method for adjusting the recording levels of audio channels 1 and 2. AUTO : Set here for automatic adjustment. MAN : Set here for manual adjustment. 4 AUDIO IN (audio input selector) switch These are used to select the input signals to be recorded on audio channels 1 and 2. FRONT : The input signals supplied from the microphone which has been connected to the MIC IN jack 1 are recorded. W.L. (wireless) : The input signals from the slot-in wireless microphone receiver are recorded. REAR : The audio input signals supplied from the audio component which has been connected to the AUDIO IN CH1/CH2 connectors 5 are recorded. When you use stereo microphone (AJ-MC900G optional), set both CH1 and CH2 to [FRONT]. The signal from L CH is recorded to CH1 and that from R CH to CH2. 5 AUDIO IN CH1/CH2 (audio input channel 1 & 2) connectors (XLR, 3-pin) An audio component or microphones are connected here. This unit does not support AES/EBU signals. 6 LINE/MIC/+48V (line input/mic input/mic input + 48V) selector switch This is used to switch the audio input signals from the audio component which has been connected to the AUDIO IN CH1/CH2 connectors 5. LINE : The audio input signals from the audio component serving as the line input are selected. MIC : The audio input signals from the internal power supply type of microphone are selected. (The phantom mic power is not supplied from the unit.) +48V : The audio input signals from the external power supply type of microphone are selected. (The phantom mic power is supplied from the unit.) 7 Wireless receiver slot The UniSlot wireless receiver (optional accessory) can be attached here. 8 FRONT AUDIO LEVEL (audio recording level adjustment) control This enables the recording level of audio channels 1 and 2 to be adjusted. However, when the AUDIO SELECT switch is set to the AUTO position, the audio recording level is automatically adjusted. When the screen is opened from the VTR MENU page by performing a menu operation, whether to enable or disable the operation of this level control can be set using the FRONT VR CH1 and FRONT VR CH2 setting items. 12