Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 109

Chapter 7 Menu description tables (continued) 7-3-5 LOW SETTING Item Variable range R (PHASE) -63 : +00 : +63 SCUFR R-Mg (PHASE) -63 : +00 : +63 SCUFR Mg (PHASE) -63 : +00 : +63 SCUFR Mg-B (PHASE) -63 : +00 : +63 SCUFR B (PHASE) -63 : +00 : +63 SCUFR B-Cy (PHASE) -63 : +00 : +63 SCUFR Cy (PHASE) -63 : +00 : +63 SCUFR Cy-G (PHASE) -63 : +00 : +63 SCUFR G (PHASE) -63 : +00 : +63 SCUFR G-Yl (PHASE) -63 : +00 : +63 SCUFR Yl (PHASE) -63 : +00 : +63 SCUFR Yl-R (PHASE) -63 : +00 : +63 SCUFR ∫ COLOR ON CORRECT OFF SCUFR Remarks For performing the hue correction for red. For performing the hue correction between red and magenta. For performing the hue correction for magenta. For performing the hue correction between magenta and blue. For performing the hue correction for blue. For performing the hue correction between blue and cyan. For performing the hue correction for cyan. For performing the hue correction between cyan and green. For performing the hue correction for green. For performing the hue correction between green and yellow. For performing the hue correction for yellow. For performing the hue correction between yellow and red. For switching ON/OFF of the 12-axis independent color correction of the position selected with the GAIN switch (L, M, H). Item Variable range Remarks ∫ MASTER GAIN -3dB : 0dB : 30dB SCUFR H.DTL LEVEL 00 : 10 : 63 SCUFR V.DTL LEVEL 00 : 20 : 31 SCUFR DTL CORING 00 : 01 : 15 SCUFR H.DTL FREQ. 00 : 18 : 31 SCUFR LEVEL DEPEND. 0 1 : 5 SCUFR MASTER GAMMA 0.30 : 0.45 : 0.75 SCUFR BLACK GAMMA -3 : OFF : +3 SCUFR ∫ MATRIX TABLE OFF A S CU F RB ∫ COLOR ON CORRECT OFF S UFR For setting the master gain to -3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27 or 30 dB. For performing the horizontal detail correction level setting. For performing the vertical detail correction level setting. 7 For performing the noise elimination level setting for detail. For performing the horizontal detail frequency selection. For setting the LEVEL DEPEND. When the Y-detail is emphasized, details of dark sections are compressed. If the numerical value is larger, details of bright sections are also compressed. For setting the master gamma. (0.01 step) For setting the gamma curve for the dark portion. -3 to -1: The dark portion is compressed. OFF: Standard state +1 to +3: The dark portion is extended. For selecting the color correction table for the linear matrix. For switching ON/OFF of the 12-axis independent color correction. Items with $ in front of their names are set by the PAINT MENU SW ($) R/W menu items on the screen. Items without $ in front of their names are set by the PAINT MENU LEVEL R/W menu item. For details, refer to "7-6-2 CARD R/W SELECT." The underlining in the variable range column indicates the setting in the preset mode. 109