Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 89
Connection of the remote, control unit AJ-RC10G, 11 Connection of the external, switch
![]() |
UPC - 791871302781
View all Panasonic AJ-HDX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 5 Preparation (continued) 5-10 Connection of the remote control unit (AJ-RC10G) 5-11 Connection of the external switch It is possible to control some of the functions remotely by connecting the remote control unit AJ-RC10G (optional accessory). When AJ-RC10G is connected to the REMOTE connector on the unit and the power switches of both of the unit and AJRC10G are turned on, the unit automatically enters the remote control mode. The remote control mode is released when AJ-RC10G is removed or the power for the AJ-RC10G is turned OFF. Switch functions in the remote control mode In the remote control mode, the following switches and buttons on the unit are disabled. O SHUTTER switch O MENU button O JOG dial button O GAIN switch O OUTPUT/AUTO KNEE switch O WHITE BAL switch O USER MAIN button O USER 1 button O USER 2 button VTR operations in the remote control mode In the remote control mode, the VTR can be operated with either the unit or AJ-RC10G. O The state that was adjusted by connecting AJ-RC10G is stored in the unit. Not to store the adjusted state in the unit, open the FUNCTION MENU of AJ-RC10G to set the RC DATA SAVE item to "OFF". O When the dedicated cable is connected or removed, ensure that the POWER switches on both the main unit and AJ-RC10G are turned "OFF". It is possible to draw 1.5 A current from the DC OUT connector of the unit. REC start/stop can be controlled by connecting an external switch to this connector. Since a tally lamp can be used by connecting an LED to this connector, it is useful for shooting video when fixing the camera on a crane. 5 DC OUT connector 41 32 Connector at the cable side HR10A-7R-4P(73) (Hirose Denki) Dedicated cable AJ-RC10G LED Resistance Max. 50 mA REC start/stop REMOTE connector 1: GND 2: TALLY OUT Open collector output on the unit side TALLY ON: Low impedance TALLY OFF: High impedance 3: REC start/stop switch This is connected in parallel to the REC START button on the unit or the VTR button on the lens 4: +12V 89
![](/manual_guide/products/panasonic-ajhdx900-dvcpro-hd-camera-6b13c28/89.png)