Panasonic AJ-HDX900 Dvcpro Hd Camera - Page 54
Super black ON, Super iris ON, Interval, pre-rec, display, Zoom display, Iris, f-value, <Note>
![]() |
UPC - 791871302781
View all Panasonic AJ-HDX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 4 Adjustments and settings for recording (continued) Display item E AUDIO input system and level meter F Super black ON G Super iris ON H Iris override display I Iris, f-value J Zoom display K Interval, pre-rec display (Jump indication) L Dynamic range stretcher mode M Compression mode What is displayed Status when display appears F W R B S ++ + (No display) - - - NC OPEN F1.7 to F16 CLOSE This indicates the audio channels selected and their audio levels. This appears when the AUDIO IN switch is at the FRONT position. This appears when the AUDIO IN switch is at the WIRELESS position. This appears when the AUDIO IN switch is at the REAR position. This appears when S.BLK has been set to ON. This appears when S.IRIS has been set to ON. When the iris override function is working, this indicates how much compensation is provided. ++: The aperture is opened by a full stop. +: The aperture is opened by a half stop. - -: The aperture is closed by a full stop. -: The aperture is closed by a half stop. No display: Reference status This appears when the lens cable is not connected. This appears when the lens aperture is open. This indicates the aperture value (f-value) of the lens. This appears when the lens aperture is closed. These displays appear when using a lens equipped with an aperture value display function. They flash while the aperture is being changed for the iris override. Z00 to Z99 i (flashing) iREC (lighting) iREC (flashing) ¢¢h¢¢m/¢¢s P-REC (flashing) ¢s TAPE ¢s JUMP (flashing) DRS COMP This indicates the amount of zoom. Note that this item is not displayed even if the display setting is ON if the lens is not equipped with a zoom position return function. This appears in the INTERVAL REC mode during the times when the operation of the REC button is not acknowledged before the start of or at the end of recording. This appears during an INTERVAL REC operation. This appears during INTERVAL REC standby to indicate the wait time until the next recording. This indicates the amount of time remaining until the end of the set PRE REC time during PRE REC operation. This appears when recording is stopped by turning OFF the PRE REC MODE (in the state where signals accumulated in the built-in memory are recorded on tape). This appears during the jump function. This appears when the video level of a part with high brightness is compressed, and the function stretching the dynamic range is selected. This appears when setting the mode for suppressing distortion of compressed video images that may occur when dark parts are shot. 54
![](/manual_guide/products/panasonic-ajhdx900-dvcpro-hd-camera-6b13c28/54.png)