Panasonic DMREZ47V Dvd Recorder - English/spanish - Page 9

Scheduled Recording Refer to "Advanced Scheduled Recording" (¼ 18) for detailed information on scheduled recording. [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Digital broadcasts cannot be recorded to video tape. Preparation: Turn on the television and select the appropriate video input to suit the connections to this unit. [RAM] If the disc is protected, release protection (¼ 44). [VHS] Ensure accidental erasure tab is intact. Insert a disc or VHS cassette with enough remaining blank space. Confirm that the clock on the unit's display is set to the correct time. If connected via a cable box or satellite receiver, set channel on those equipment before scheduled recording starts. DRIVE SELECT to select the drive (DVD or VHS). Schedule List No Channel Remaining Recording Time VHS 2:00 SP DVD 0:33 XP 5/ 4 Fri 6:11 PM Date On Off Drive Mode Check New Scheduled Recording Press ENTER to set new schedule. ENTER ,  to select "New Scheduled Recording", then ENTER to move through the items and ,  to set the items. Channel/Input - TV Station/External Input Date/Frequency - You can set a daily or weekly program. On (start time) / Off (end time) - Hold button to change in 30-minute increments. Drive - DVD or VHS Mode - Recording mode, see page 14 Name (only for discs) - Press [ENTER], see page 34. SCHEDULED RECORDING Remaining Recording Time VHS 2:00 SP DVD 0:33 XP 5/ 4 Fri 6:11 PM Channel/ Date/ Input Frequency On Off Drive Mode 4-1 : : Channel, Caption Preview of selected channel 4-1 KPO-SD ENTER Name Set Channel/Input. Cancel Number ENTER −Repeat steps 3−5 to program other recordings. DVD/VHS POWER when you have finished programming. −"" lights on the unit's display. −Scheduled recording can be started only when the unit is turned off. Basic Operations DVD/VHS POWER POWER DRIVE SELECT TV/VIDEO CH VOL 12 45 78 0 CANCEL RESET TRACKING/V-LOCK 3 CH 6 9 INPUT SELECT DELETE SLOW/SEARCH SKIP/INDEX REW FF STOP PAUSE PLAY TIME SLIP/ JET REW SCHEDULE CM SKIP DIRECT NAVIGATOR FUNCTIONS ENTER SUB MENU RETURN CREATE AUDIO DISPLAY CHAPTER VCR/TV Tips Icons such as " [RAM] " indicate usable discs. Refer to pages 74 and 75. Notes Be sure to perform step 6 before the scheduled recording time. When the unit is turned off, "" lights on the unit's display to indicate scheduled recording standby has been activated. "" flashes when the unit cannot go to scheduled recording standby. (e.g., a recordable disc is not in the disc tray) It does not flash if Quick Start is off. When scheduled recordings are set to start one immediately after another, the unit cannot record the beginning of the later program. If two scheduled recording times overlap, the first recording always has priority. The second recording will start only after the first recording has finished. Scheduled recording cannot be executed on both DVD and VHS drives at the same time. When starting time for a scheduled recording is the same, the recording that you programmed later has priority. Depending on the Daylight Savings Time (DST) settings for this unit, scheduled recordings may be affected when the seasons change. 9 RQT8853