Panasonic KX-MB262CX Operating Instructions - Page 15
Recording paper, default. If you want to use letter or legal size
View all Panasonic KX-MB262CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1. Introduction and Installation 1.7 Recording paper The paper input tray unit can hold: - Up to 250 sheets of 60 g/m2 to 75 g/m2 paper. - Up to 230 sheets of 80 g/m2 paper. - Up to 200 sheets of 90 g/m2 paper. L Please refer to page 84 for information on recording paper. L The unit is set for printing A4 size paper by default. If you want to use letter or legal size paper, change the setting (feature #380 on page 55). 1 Pull the paper input tray (1) until it clicks into place, then pull it completely out, lifting the front part of the tray. 3 Load the paper, print-side up (2). Important: L Push and lock the plate (3) in the paper input tray, if it is lifted. 2 1 2 Before loading a stack of paper, fan the paper to prevent paper jams. 3 4 Adjust the recording paper guides. Pinch the front side of the recording paper guide (4), then slide it to match the paper size mark. Pinch the right side of the recording paper guide (5), then slide it to adjust the width to the size of the recording paper. L Make sure that the recording paper is under the paper limit mark (6), and the paper should not be loaded over the snubbers (7). 6 5 7 4 15