Panasonic KX-MB262CX Operating Instructions - Page 58
Setting the Error Correction, Activating the Distinctive
View all Panasonic KX-MB262CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
9. Programmable Features Feature/Code Sending a fax at a specific time {#}{4}{1}{2} Setting the Error Correction Mode (ECM) {#}{4}{1}{3} Setting the connecting tone {#}{4}{1}{6} Activating the Distinctive Ring feature {#}{4}{3}{0} Selection This feature allows you to take advantage of low-cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time. {0} "OFF" (default) {1} "ON" To send a document: 1. If the {FAX} light is OFF, turn it ON by pressing {FAX}. 2. Set the original (page 19). 3. If necessary, change to the desired resolution (page 36) and the desired contrast (page 36). 4. {MENU} i {#}{4}{1}{2} 5. Press {1} to select "ON". i {SET} 6. Enter the fax number. L To enter an item using one-touch dial feature and navigator directory, see step 3 on "6.3.1 Using the scanner glass", page 38. (When using navigator directory, you do not have to press {DIRECTORY} before pressing {V} or {^}.) 7. {SET} 8. Enter the transmission start time. L If you selected 12-hour time entry (page 21), press {*} repeatedly to select AM or PM. L If you selected 24-hour time entry (page 21), the time is set using 24hour time entry. 9. When using the scanner glass, press {SET}. i {START} When using the auto document feeder, press {SET}. L The document will be fed into the unit and scanned into memory. The unit will then send the data at the specified time. Note: L To cancel after programming, press {STOP} while the unit is idle, and then press {SET}. This feature is available when the sending / receiving fax machines are ECM compatible. {0} "OFF": Deactivates this feature. {1} "ON" (default): If there is an error during fax transmission / reception, the unit will support the communication. If you often have trouble when sending faxes, this feature allows you to hear connecting tones: fax tone, ring back tone and busy tone. You can use these tones to confirm the status of the other party's machine. {0} "OFF": Deactivates this feature. {1} "ON" (default): You will hear connecting tones. Note: L If the ring back tone continues, the other party's machine may not be a fax machine or may have run out of paper. Check with the other party. L The connecting tone volume cannot be adjusted. {0} "OFF" (default) {1} "ON" Note: L This feature may not be available depending on feature #114 setting (page 3). L See page 51 for details. 58