Panasonic KX-MB262CX Operating Instructions - Page 44

6. Fax (KX-MB772 only) Note: L To stop receiving, see page 64. L To receive fax documents using the extension telephone, make sure remote fax activation is turned ON (feature #434 on page 59) beforehand. The default setting is ON. 6.8.2 Activating TEL/FAX mode Important: L Not available when "NEW ZEALAND" is selected in feature #114 on page 54. 1 Make sure feature #404 is set to "TEL/FAX" beforehand (page 57). 2 Press {FAX AUTO ANSWER} repeatedly to display "TEL/FAX MODE". L The {FAX AUTO ANSWER} light turns OFF. 3 The ringer volume setting should be ON (page 21). L Callers will hear a ring back tone different from the one generated by the telephone company. L When you answer the call using an extension telephone connected to the [EXT] jack, press {STOP} on the unit to talk to the calling party. B If you do not answer the call, the unit will activate the fax function. L Some fax machines do not generate fax calling tones when sending faxes, therefore the unit will try to receive a fax even if no fax calling tone is detected. How phone calls and faxes are received 1. "INCOMING CALL" will be displayed but the unit will not ring. 2. The unit will wait for the duration of 2 rings before answering the call. L The number of rings is determined by the "TEL/FAX delayed ring setting" (feature #212 on page 57). L During this time, an extension telephone will ring. 3. The unit will answer the call and try to detect a fax calling tone. When a fax calling tone is detected The unit receives the fax automatically without ringing. When a fax calling tone is not detected A The unit will ring 3 times. You may answer the call. L The number of rings is determined by the "Silent fax recognition ring setting" (feature #436 on page 59). 44