Panasonic KX-WP1050 Wifi Telephone - Page 153
Save], Restart], Setting, Description, IP Address], Subnet Mask], DHCP Server], Starting IP, Number
UPC - 037988840205
View all Panasonic KX-WP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Base Unit Settings 3 Configure the settings, then click [Save]. Setting [IP Address] [Subnet Mask] [DHCP Server] [Starting IP Address] [Number of Leased IP Address] Description L Enter the IP address and subnet mask corresponding to your local network. L Set 4 numbers (0 - 255) separated by periods such as "192.168.0.253". Note: L There are some restrictions on IP address entry. For example, "0.0.0.0" and "255.255.255.255" are not available. L This setting assigns IP addresses to devices on your LAN. Select whether to enable or disable this feature. L Enter the starting IP address for the DHCP server's IP assignment. L Enter the number of the leased IP addresses (maximum: 5). The first IP address is assigned to the handset. The subsequent ones are assigned to computers. 4 Click [Restart]. L The base unit automatically restarts and the Top Menu is displayed. Note: L If you change the LAN network settings or DHCP server settings, the entries in the Static DHCP table will be deleted. L In step 4, if the LAN side setting is changed, you need to change your computer's setting and click the link shown on the Restarting page. For assistance, please visit http://www.panasonic.com/help 153