Panasonic KX-WP1050 Wifi Telephone - Page 199
Downloading the version-up firmware to your computer for recovering the base unit
UPC - 037988840205
View all Panasonic KX-WP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Base Unit Settings Downloading the version-up firmware to your computer for recovering the base unit When the WAN Indicator is flashing in amber, the firmware of the base unit is defective and the base unit is operating in recovery mode. Before downloading the firmware for the base unit, you need to set the static IP address on your computer. For setting the static IP address on your computer, see page 204. On your computer: 1 On the Web browser, enter http://192.168.102.1 On the base unit: 2 Specify the file name. You can also click [Browse...] to select the desired file name from the list. 3 Click [Start]. L The base unit automatically restarts after the firmware is updated. Important: L Do not interrupt the firmware updating process by cutting the power supply until the progress indicator reaches 100% and the base unit restarts itself. 4 Confirm the WAN Indicator is not flashing in amber, then set your computer settings back to the previous conditions. For assistance, please visit http://www.panasonic.com/help 199