Panasonic KX-WP1050 Wifi Telephone - Page 165
Restart], Important, Save], Delete], Destination Port], Protocol], Log Output], Setting, Description
UPC - 037988840205
View all Panasonic KX-WP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Base Unit Settings Setting [Destination Port] [Protocol] [Log Output] Description L Enter the packet destination IP address/netmask to be filtered. L The entry is the same as the Source Port. L Select the protocol to be used from TCP/UDP/TCP&UDP/ ESP/GRE/ICMP. If you want to set all protocols, select "*". L Set whether to display the temporarily saved packet information on the "Packet Filtering Log:" (page 190). *1 When direction is WiL, Source IP 'local' is Invalid. When direction is LiW, Destination IP 'local' is invalid. 5 Click [Restart]. L The base unit automatically restarts and the Top Menu is displayed. Important: L The packet filtering is NOT executed for the DMZ host. Note: L To edit the setting: 1 Click the desired entry number in step 3. 2 Edit the items in the Packet Filtering Setting page. 3 Click [Save]. 4 Click [Restart]. L To delete the setting: 1 Click the desired entry number in step 3. 2 Click [Delete] in the Packet Filtering Setting page. 3 Click [OK] in the confirmation dialog box. 4 Click [Restart]. L As the default security policy, outgoing packets initiated from the computer on your LAN to the Internet are allowed, but other packets are denied. L Security functions are executed in the following order: - Easy security (Attack detection) - Packet filtering - Easy security (except for Attack detection) L This feature is not available in AP (Bridge) mode. For assistance, please visit http://www.panasonic.com/help 165