Panasonic KX-WP1050 Wifi Telephone - Page 167
Restart], Save], Delete], Setting, Description, Status], Destination, Network/Mask], Gateway]
UPC - 037988840205
View all Panasonic KX-WP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Base Unit Settings 4 Configure the settings under the Routing Setting heading, then click [Add] to add a new entry. Setting Description [Status] L Select whether to enable or disable the routing setting. [Destination Network/Mask] L Enter the network address/netmask for the destination IP address. L If you want to set one IP address, enter that IP address in IP address field and "32" in netmask field. (e.g. If you want to control the packet from 192.168.1.1, enter "192.168.1.1" in IP address field and "32" in netmask field.) [Gateway] L If you want to set a range of IP addresses, enter that network address in IP address field and it's netmask in netmask field. (e.g. If you want to control the packet from 192.168.1.0 192.168.1.255, enter "192.168.1.0" in IP address field and "24" in netmask field.) L Enter the gateway IP address. 5 Click [Restart]. L The base unit automatically restarts and the Top Menu is displayed. Note: L To edit the setting: 1 Click the desired entry number in step 3. 2 Edit the items in the Routing Setting page. 3 Click [Save]. 4 Click [Restart]. L To delete the setting: 1 Click the desired entry number in step 3. 2 Click [Delete] in the Routing Setting page. 3 Click [OK] in the confirmation dialog box. 4 Click [Restart]. L This feature is not available in AP (Bridge) mode. For assistance, please visit http://www.panasonic.com/help 167