Panasonic KX-WP1050 Wifi Telephone - Page 217
Computer communication, Problem, Cause/Solution, XX:XX:XX:XX:XX:XX or
UPC - 037988840205
View all Panasonic KX-WP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Useful Information Computer communication: Problem "The system has detected a conflict for IP address with the system having hardware address XX:XX:XX:XX:XX:XX" or "Another device on your TCP/IP Internet, which has the physical address XX:XX:XX:XX:XX:XX, is currently using the same IP address (XXX.XXX.XXX.XXX). Your TCP/IP network interface has been shut down." is displayed in the dialog box. Shortcut icon is not displayed in the My Network Places folder. My computer cannot obtain IP address. Wireless communication does not work. After setting MAC Address Filtering, wireless communication does not work. Cause/Solution L Turn off all the devices. Turn on the base unit and then the computer's and the handset. L Check that all the computers are set to Obtain an IP Address automatically. L Check that the available address range and each of the IP addresses of the specific devices in the network do not overlap. L UPnP Windows component is not installed in Windows XP. Enable UPnP Windows component (page 209). L When the Internet connection mode is DHCP, Static or PPPoE, the base unit may lease all IP addresses. Restart the base unit and your computer's. L When the Internet connection mode is AP (Bridge), check the existing router. L Check that the SSID and wireless security settings are same as the base unit settings. These factory default setting values are shown on the included Wireless LAN sticker. L When signal strength is weak, change the location of the base unit or get rid of the obstacle around the base unit. L Check that your computer's MAC Address is registered in the MAC Address Filtering table (page 172). For assistance, please visit http://www.panasonic.com/help 217