Panasonic KX-WP1050 Wifi Telephone - Page 197
Apply], Setting, Description, IP Address], Subnet Mask], Static IP Address, DHCP Server]
UPC - 037988840205
View all Panasonic KX-WP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Base Unit Settings L IP address and Subnet Mask under the WAN heading show the current WAN side settings of the base unit. L IP address, Subnet mask and Starting IP address (DHCP Server) under the LAN (settings) heading show the current LAN side settings of the base unit. 1 Enter IP address, Subnet Mask and Starting IP address (DHCP Server) under the LAN (temporary) heading. L See also the Help on the LAN (temporary) heading for data entry. Setting [IP Address] [Subnet Mask] [Static IP Address (DHCP Server)] Description L Enter the IP address and subnet mask corresponding to your temporary local network. L Set the third number (0 - 255) separated by periods different from that of the WAN, such as "192.168.101.1" Note: L There are some restrictions on IP address entry. For example, "0.0.0.0" and "255.255.255.255" are not available. L Enter the starting IP address for the DHCP server's IP assignment. L Set the third number (0 - 255) separated by periods same as that of the LAN (temporary) you set above, such as "192.168.101.100" 2 Click [Apply]. L The restarting page is displayed when the entered IP address, Subnet mask and Starting IP address (DHCP Server) are correct. For assistance, please visit http://www.panasonic.com/help 197