Panasonic KX-WP1050 Wifi Telephone - Page 171
WPA-PSK/WPA2-PSK Settings, Security Mode]
UPC - 037988840205
View all Panasonic KX-WP1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Base Unit Settings 3 Configure the settings, then click [Save]. Setting Description [Security Mode] L Select the desired security mode. L No Encryption (Open), WEP, WPA-PSK and WPA2-PSK are available for the wireless devices, including the handset. Select the desired security mode for your wireless devices connected to the base unit. Default is set to WEP. WEP settings [Network Key] For WEP 64bit: L Enter the network key containing 5 alphanumeric characters or 10 hexadecimal characters. For WEP 128bit: L Enter the network key containing 13 alphanumeric characters or 26 hexadecimal characters. L Press [View] to display the network key. [Key Index] L Select [Key 1], [Key 2], [Key 3] or [Key 4] to be used if you use WEP. The default is set to [Key 1]. WPA-PSK/WPA2-PSK Settings [Network Key] L Enter the network key (8 - 63 alphanumeric characters) in this data field. L Press [View] to display the network key. [Data Encryption] L Select the desired data encryption method. For WPA-PSK L If your wireless devices use TKIP, select [TKIP] or [TKIP+AES]. L If your wireless devices use AES, select [TKIP+AES]. For WPA2-PSK L If your wireless devices use TKIP, select [TKIP+AES]. L If your wireless devices use AES, select [AES] or [TKIP+AES]. [Session-Key renewal interval] L Set the interval for refreshing the encryption key between 30 and 604800 seconds. 604800 seconds is the equivalent of one week. The default is set to 1800. 4 Click [Restart]. L The base unit automatically restarts and the Top Menu is displayed. For assistance, please visit http://www.panasonic.com/help 171