Panasonic PT-LB30 Projector - Network Ib - Page 12
Computer operations
UPC - 791871111154
View all Panasonic PT-LB30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Simple Wireless Connection (Using the Initial Settings) (cont.) Computer operations 1 Turn on the computer. 2 Select [Start] → [Programs] → [Panasonic Wireless Display] → [Wireless Manager mobile edition 2.0]. Wireless Manager ME 2.0 starts up, and the connection select window shown below appears. For multiple transmissions, refer to page 23. 3 Select the connection and click [OK]. The launcher shown below appears and the connection with the projector is established. Notes: • The initial network number for both the projector and the computer is "1". These numbers must match for the connection. Also, WEP is enabled when network number is anything but "1", so when security is a concern, use a different number than "1". Image and audio data are encrypted using AES in all networks, so essential data are protected. • Depending on the computer and wireless card used, automatic setup may not be possible. If this is the case, the [Network] setting on the screen in step 2 above will be switched to [USER] automatically. For details of the connection procedure, first close Wireless Manager ME 2.0, and then refer to page 32. • When anti-virus software and utilities for network cards are installed, these may prevent connection of the projector. (See pages 51 to 53) 12