Panasonic PT-LB30 Projector - Network Ib - Page 14

Using Wireless Manager ME 2.0 Startup Select [Start] → [Programs] → [Panasonic Wireless Display] → [Wireless Manager mobile edition 2.0]. Description of the connection select window When the [Make an automatic connection] checkbox in [Automatic connection setting] has been checked in Options (see page 26) and a connection with the projector registered as a destination for automatic connection is possible, connection with the projector will be performed automatically, and the connection select window will not be displayed. When only one projector is connected, select [Single] and the projector from the list of destination. When multiple projectors are connected, select [Multi-] and select multiple projectors. When the network number to be connected differs, select the network number to be connected. The network settings change according to this selection. This network number is stored in the computer, so connection is performed with the current number the next time Wireless Manager ME 2.0 is started up. This indicates the number of people connected to this projector. This indicates the status of this projector. This appears when password entry is needed for connection. (See page 27) When there are two or more projectors with the same name, each projector is automatically assigned its own ID for identification purposes. The equipment to be connected can be designated when [Network] is set to [USER]. Projector name (See page 30) Click this to display the projector name at the upper left of the projection screen for the projector in question. 14