Panasonic WVCW974 WVCW974 User Guide - Page 35

**PRESET POSITION** 1 2* 3* 4* 5* 6* 7* 8* 9* 10* 11* 12* 13* 14* 15* 16* 17* 18* 19* 20* 21* 22* 23* 24* 25* 26* 27* 28* 29* 30* 31* 32* ID:DOOR 033-064 225-256 RET TOP PTR 1 to 4 : Activates the patrol function when the trigger time elapses. TRK : After the trigger time elapses, the camera returns to the home position and then automatic tracking starts. Following that, after a set time, the camera returns to the home position and auto tracking repeats. (3) Home Position Setting (HOME POSITION) A currently configured preset position can be designated as the home position. Pressing the HOME button of the system controller will cause the camera to move to the currently specified home position. Use the following procedure to make a preset position the home position. Notes: • The HOME setting should be selected when you want to normally leave the camera in the home position and occasionally perform pan and tilt, or when you want to activate SEQ. • PTR1-4 displays only the set number of patrol routines (page 37). 1. Move the cursor to HOME POSITION, and then tilt the joystick left or right to select the position number of the preset position you want to make the home position. This causes the preset position whose position number you select to become the home position. If you do not want to use the home position function, select OFF for the HOME POSITION setting. (5) Auto Mode Setting (AUTO MODE) Use the auto mode setting to specify the camera movement mode (OFF, SEQ, SORT, AUTO PAN, PATROL 1~4, AUTO TRACK). After selecting AUTO PAN, you can use the AUTO PAN setting menu to configure detailed settings. 1. Move the cursor to AUTO MODE, and then tilt the joystick left or right to select a camera movement (4) Self Return Setting (SELF RETURN) The self return setting can be used to specify automatic return to a particular mode if a certain amount of time elapses without any operation being performed. 1. Move the cursor to SELF RETURN, and then tilt the joystick left or right to select a self return trigger setting. Tilting the joystick cycles through the self return display in the sequence shown below. (unit: sec, min) OFF ↔ 1S ↔ 2S ↔ 3S 10S ↔ 20S ↔ 30S ↔ 40S mode setting. OFF : Manual movement only SEQ : Sequentially switches between preset positions in position number sequence. (sequential movement) SORT : Sequentially switches between preset positions counterclockwise, starting from the camera home position. (sort movement) AUTO PAN:Camera pans automatically within the range specified by PAN. Selecting AUTO PAN and pressing the CAM (SET) button will display the 60MIN 50S AUTO PAN setting menu, which can be used 30MIN ↔ 20MIN ↔ 10MIN ↔ 5MIN ↔ 3MIN ↔ 2MIN ↔ 1MIN 2. If you selected any setting other than OFF in step 1, press the CAM (SET) button and then tilt the joystick left or right to select a self return mode. OFF ↔ AUTO ↔ HOME ↔ APAN ↔ SEQ ↔ SORT for configuring detailed settings. (page 36) PATROL 1 to 4:Operates the camera in accordance with patrol function settings. AUTO TRACK:Auto tracking is done for moving objects. Tilting the joystick cycles through settings in the TRK ↔ PTR4 ↔ PTR3 ↔ PTR2 ↔ PTR1 sequence shown below. OFF : In the auto mode, exits the auto mode when the trigger time elapses. OFF ↔ SEQ ↔ SORT ↔ AUTO PAN ↔ PATROL1 ↔ PATROL2 AUTO TRACK ↔ PATROL4 ↔ PATROL3 AUTO (AUTO MODE setting not OFF) : Returns to Notes: the auto mode when the trigger time • The auto mode is exited automatically whenever elapses. manual PAN/TILT or ZOOM/FOCUS is AUTO (AUTO MODE setting OFF) : Returns to the performed if AUTO PAN is operating and home position when the trigger time PAN/TILT does SEQ, SORT, PATROL, or AUTO elapses. TRACK movement. Note, however, that that the HOME : Returns to the home position when the contents of the setting menu do not change. To trigger time elapses. return to the auto mode, open the setup menu APAN SEQ SORT : Activates auto pan when the trigger time elapses. : Activates the sequence function when the trigger time elapses. : Activates the sort function when the trigger time elapses. -35- and then close it again. The auto mode will also activate when the self return trigger time (this page) elapses. • During operation, the lens may enter the refresh mode. • PATROL1-4 displays only the set number of patrol routines (page 37).