Panasonic WVCW974 WVCW974 User Guide - Page 57
Mode Off, Seq, Patrol, Auto
UPC - 791871505373
View all Panasonic WVCW974 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Problem The camera movement mode (OFF, SEQ, SORT, AUTO PAN, PATROL, AUTO TRACK) setting changes. Camera position is different from the preset position setting. Picture is different from the position setting. Upper part of the picture is black when the camera is in a horizontal orientation. Camera suddenly starts to pan by itself. Auto tracking does not move the camera when the target moves. Cause and Recommended Action Reference Pages • Check the self return function. 35 • Perform REFRESH from the special setup menu. 48 • Adjust the picture using the preset menu and a scene file. 25-26 • This is caused by the camera's internal cover. It does not indicate malfunction. 40 • If the cleaning function is turned on, this is normal does not indicate malfunction. Check the 40 CLEANING settings. • If the cleaning function is not turned on, this 7, 9 symptom could be due to noise. • Check the camera installation height setting. An incorrect installation height setting can cause 41 malfunction. Input the camera and target area heights correctly. • Check if the area the target is in has been masked. 42 • Check the AUTO RELEASE setting. If a setting has been configured, tracking will terminate 42 automatically after the preset time has expired. • SENSITIVITY may be set too low. 41 Use a higher SENSITIVITY setting. • The target size may be too small. Adjust the view angle to increase the size of the 41 target. -57-