Philips DVDR77 User manual - Page 103

Sound settings

Get Philips DVDR77 PDF manuals and user guides View all Philips DVDR77 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

ENGLISH a No picture appears on the TV after switching Check the display of your DVD recorder. 'PRO': 'Progressive Scan' is on No display: 'Interlaced' is on. Switch your TV to the corresponding input jack or select the corresponding connection. You can also switch the Component video output signal as follows: 1 Disconnect the recorder's power cord. 2 Hold down N on the DVD Recorder while reconnecting the power cord. 'PRO' (progressive scan) appears on the display. 3 If you want to switch back, repeat steps 1 and 2 . 'PRO' disappears from the display. The DVD Recorder is switched to 'Interlaced.' Problem Sound settings Depending on the audio outputs being used, this menu provides you with a selection of settings. If you are only using the analog audio outputs (red and white AUDIO L/R OUT , AUDIO L/R OUT jacks), select 'Off' in the 'Digital output' menu. 'Digital output' You can select one of the following settings for devices that are connected to the COAX OUT or OPTICAL AUDIO OUT jacks: 'All' : Dolby Digital and DTS signals are going out unchanged to the digital output. MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation). Use receivers/amplifiers with a digital multi channel sound decoder. 'PCM only' : Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation). For receivers/amplifiers without a digital multi channel sound decoder. 'Off' : digital output is off. For devices with an analog audio input. 'Analog output' You can select from the following settings for devices connected to the analog outputs ( AUDIO L/R OUT , AUDIO L/R OUT ). 'Stereo' : For devices that use neither DolbySurround nor TruSurround. Only use this setting when the DVD Recorder is connected to a stereo TV. 'Surround' : Dolby Digital and MPEG-2 multi-channel are mixed to a Dolby Surround-compatible two-channel output signal. For devices with a Dolby Surround / Pro Logic decoder . Digital output Analog output Night mode All Stereo Off Sound User preferences 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
91
a
No picture appears on the TV after switching
Check the display of your DVD recorder.
'PRO': 'Progressive Scan' is on
No display: 'Interlaced' is on. Switch your TV to the corresponding
input jack or select the corresponding connection. You can also
switch the Component video output signal as follows:
1
Disconnect the recorder's power cord.
2
Hold down
N
on the DVD Recorder while reconnecting the
power cord. 'PRO' (progressive scan) appears on the display.
3
If you want to switch back, repeat steps
1
and
2
. 'PRO' disappears
from the display. The DVD Recorder is switched to 'Interlaced.'
Problem
Sound settings
Depending on the audio outputs being used, this menu provides you with a selection of settings.
If you are only using the analog audio outputs (red and white
AUDIO L/R OUT
,
AUDIO L/R
OUT
jacks), select '
Off
' in the '
Digital output
' menu.
Sound
Digital output
All
Analog output
Stereo
Night mode
Off
'
Digital output
'
You can select one of the following settings for devices that are connected to the
COAX
OUT
or
OPTICAL AUDIO OUT
jacks:
'
All
'
:
Dolby Digital and DTS signals are going out unchanged to the digital output. MPEG-2
multi-channel signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers
with a digital multi±channel sound decoder
.
'
PCM only
'
:
Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation).
For receivers/amplifiers
without a digital multi±channel sound decoder
.
'
Off
'
:
digital output is off.
For devices
with an analog audio input
.
'
Analog output
'
You can select from the following settings for devices connected to the analog outputs (
AUDIO
L/R OUT
,
AUDIO L/R OUT
).
'
Stereo
'
:
For devices that use neither DolbySurround nor TruSurround. Only use this setting
when the DVD Recorder is connected to a stereo TV.
'
Surround
'
:
Dolby Digital and MPEG-2 multi-channel are mixed to a Dolby Surround-compatible
two-channel output signal.
For devices
with a Dolby Surround / Pro Logic decoder
.
ENGLISH
User preferences