Philips DVDR77 User manual - Page 97
Programming a recording without the, VCR Plus, system
View all Philips DVDR77 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
ENGLISH Fit to space Recording You can select also the recording mode 'FR' . With these setting the recording mode (bit rate) will be automatically calculated to use the complete empty space (title 'Empty'). If the empty space is too small the recording will be stopped to prevent the following titles from being overwritten. Do not use this function under the following conditions: •) more then one programmed recording •) daily/weekly repeated recordings May be the calculation of the recording mode can not function properly. 7 8 If all information is correct, press the OK button. The information is stored in a TIMER block. To end, press TIMER s . 9 Insert a recordable disc in the Recorder. The disc is checked. 10 Locate on the disc the position where you want to start the recording. Press STOP h . 11 Switch the Recorder off with STANDBY m . The programmed recording will only function properly when the DVD Recorder has been switched off using the STANDBY m button. If any of the TIMER blocks are in use, 'TIMER' will light up on the display. Tip Programming a recording without the VCR Plus+® system 1 2 3 4 5 Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel). With the Recorder on, press TIMER s on the remote control. The programming method selected last is marked. Select line 'Timer Programming' using B or A and confirm with C . The information will be displayed. Select the entry field with D or C . Enter information with B , A or the number buttons 0..9 . In the entry field 'Date', you first enter the month and then the date. Timer Timer Programming Rec Date Ch. Start End Mode 01/22 01 08:30AM 10:00PM M1 Mo-Fr/Weekly Press SELECT To store Press OK Programming a recording (TIMER) 85