Pioneer HTZ-BD32 Owner's Manual - Page 12

12 Before you start En Before you start Putting the batteries in the remote control 1 1. Open the rear cover. WARNING • Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries. Press lightly on this part and slide into the direction of the arrow. 2. Insert the batteries (AAA/R03 x 2). Insert as indicated by the +/* marks into the battery compartment. Insert the negative (*) side first. 3. Close the rear cover. Close securely (a click should be heard). Caution • Do not use any batteries other than the ones specified. Also, do not use a new battery together with an old one. • When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks (+ and *). • Do not heat batteries, disassemble them, or throw them into flames or water. • Batteries may have different voltages, even if they look similar. Do not use different kinds of batteries together. • To prevent leakage of battery fluid, remove the batteries if you do not plan to use the remote control for a long period of time (1 month or more). If the fluid should leak, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water. • When disposing of used batteries, please comply with governmental regulations or environmental public institution's rules that apply in your country/ area. The batteries included with the player have been provided to allow you to check product operation and may not last long. We recommend using alkaline batteries that have a longer life. Software update Product information on this product is provided on the Pioneer website. Check this website for update and service information on this product. http://www.pioneerelectronics.com