Pioneer HTZ-BD32 Owner's Manual - Page 46

46 Getting Started En Capter 3 Getting Started Making settings using  If the Setup Navigator menu is not displayed  Press HOME MENU to display the Home Menu, select Initial Setup  Setup Navigator  Start, then press ENTER. the Setup Navigator menu 3. Start Setup Navigator. Press ENTER. yy Setup Navigator starts. Be sure to perform these settings when using the player in the following situations. • When you use the player for the first time. 3 • After Initial Setup format. 4. Select the OSD language. Use / to select, then press ENTER. 5. Select the appropriate output resolution for the connected TV. Use / to select, then press ENTER. • After updating the player's software. 6. Select the appropriate aspect for the Caution • Before turning on the power, check that the connections between the player and other devices are correct. Also, turn on the power of the devices connected TV. Use / to select, then press ENTER. 7. Close the Setup Navigator menu. Press ENTER. connected to the player before turning on the player's power. yy Setup Navigator finishes and the setting is stored. yy Press RETURN to go back to the previous screen. Getting Started 1. Turn on the TV's power and switch the input. See the TV's operating instructions for the details of operating the TV. 2. Turn on the player's power. Press  STANDBY/ON. Check that the Setup Navigator menu is displayed.