Pioneer HTZ-BD32 Owner's Manual - Page 79
Restoring all the settings to, the factory default settings
View all Pioneer HTZ-BD32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Advanced settings 79 En Updating using a USB flash drive/disc Note Restoring all the settings to the factory default settings yy When an update file is provided on the Pioneer website, use your computer to download it onto a USB flash drive or disc. Carefully read the instructions on downloading update files provided on the Pioneer website. yy Store the update file in the root directory of the USB flash drive or disc. Do not store it within a folder. yy Do not put any files other than the update file on the USB flash drive or disc. yy To update using a disc, use a CD-R or CD-RW disc. yy The player supports USB flash drive formatted in FAT32/16. When formatting a USB flash drive on your computer, do so with the settings below. -- File system: FAT32 -- Allocation unit size: Default allocation size yy Only store the most recent update file on the USB flash drive or disc. yy Do not use a USB extension cable to connect a USB flash drive to the player. Using a USB extension cable may prevent the player from performing correctly. yy Steps 1 to 5 are the operations performed by the user. yy Steps 6 to 7 are the operations performed (automatically) by the player (they are intended to update the software). 1. Check that the player's power is turned on. 2. When playback is stopped, display the Home Menu screen. Press HOME MENU. 3. Select and set Initial Setup. Use / to select, then press ENTER. 4. Select and set Options d Load Default d Next Screen. Use / to select, then press ENTER. 5. Select and set OK. Use / to select, then press ENTER. 6. Press STANDBY/ON to turn off the power. 7. Press STANDBY/ON to turn on the power. Note yy After restoring all the settings to the factory default settings, use Setup Navigator to reset the player (page 46). Advanced settings 1. Plug in the USB flash drive or load the disc on which the update file is stored. 2. When playback is stopped, display the Home Menu screen. Press HOME MENU. 3. Select and set Initial Setup. Use / to select, then press ENTER. 4. Select and set Options d Update d 8 Disc or USB Storage d Start. Use / to select, then press ENTER. 5. Select and set Yes. Use / / / to select Yes, then press ENTER. 6. Updating starts. yy Software updating may take a certain period of time. 7. Updating completes.