Pioneer HTZ-BD32 Owner's Manual - Page 45

Connecting 45 En USB device connection This player can play movie, music and photo files contained in the USB device. About USB devices 1. Insert a USB device to the USB port until it fits into place. The USB devices that can be connected to the player are as shown below. • USB 2.0-compatible memory devices • FAT16 or FAT32 file system, minimum 1 GB capacity (2 GB or more recommended) 2 Connecting Note • Devices formatted with a file system other than the above cannot be used. • USB devices may not be recognized if they contain multiple partitions. • Some USB devices may not operate with this player. • Operation of USB devices is not guaranteed. Connecting the USB device Caution • Be sure to turn the player's power off before connecting or disconnecting USB devices. • Use empty USB devices (on which nothing is stored). • When using an external hard disk as the external storage device, be sure to turn on the hard disk's power before turning on the player's power. • If the USB device is write-protected, be sure to disable the write-protection. • When connecting the USB cable, hold onto the plug, set the plug in the proper direction for the port and insert it horizontally. • Placing excessive loads on the plug may result in poor contact, making it impossible to write data on the USB device. • When a USB device is connected and the player's power is turned on, do not unplug the power cord. • USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. • If more than one USB device is connected, the number displayed for the USB device may change depending on the type of device connected or circumstance. To confirm USB device number, go to [HOME MENU]  [Home Media Gallery]. Note • Devices may not work if connected to the USB port via a memory card reader or USB hub. • Use a USB cable with a length of 2 meters or less. • When inserting the USB terminal, support the top of the unit with your hand to prevent it from moving.