Pioneer HTZ-BD32 Owner's Manual - Page 65

Other Operating 65 En iPod/iPhone playback Rear of the unit Merely by connecting your iPod/iPhone to this unit, you can enjoy high-quality sound from your iPod/iPhone. You can also enjoy images with this unit. Playback and volume level setting for iPod/ iPhone music and images can be performed from this unit or the iPod/iPhone itself. Supported iPod and iPhone models: - iPod touch (4th/3rd/2nd/1st generation) - iPod classic - iPod nano (6th/5th/4th/3rd/2nd generation) TV - iPhone 4S/4/3GS/3G • The iPod nano 6G cannot play back video, but can play slide shows only. • This system has been developed and tested for the software version of iPod/iPhone indicated on the website of Pioneer (http:// pioneer.jp/homeav/support/ios/na/). • Installing software versions other than indicated on the website of Pioneer to your iPod/iPhone may result in incompatibility with this system. Note • Some iPod allow the TV output setting to be changed while connected. • When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state. • When using an iPod/iPhone not supported by this unit, use a commercially available cable to connect the iPod/iPhone to the PORTABLE IN connector of this unit. • Before connecting the iPod, turn this unit off and reduce the volume of this unit to its minimum. 1. Connect the cradle so that the mark  is downwards. Put your iPod/iPhone on it. Connect the iPod/iPhone firmly. If you turn this unit on, your iPod/iPhone is automatically turned on and recharging starts. 2. Connecting to the TV. • Some functions may be restricted depending on the model or software version. • iPod/iPhone is licensed for reproduction of noncopyrighted materials or materials the user is legally permitted to reproduce. • Features such as the equalizer cannot be controlled using this system, and we recommend switching the equalizer off before connecting. • Pioneer cannot under any circumstances accept 7 responsibility for any direct or indirect loss arising from any inconvenience or loss of recorded material resulting from iPod/iPhone failure. Other Operating • For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/ iPhone. • Images from iPod/iPhone cannot be output via the HDMI output terminal. To enjoy displaying images from the iPod/ iPhone on the TV, connect the VIDEO OUT of the iPod cradle and the video input terminal on your TV. You will need the video cable which comes with this unit to connect. If you are already using the video cable which comes with this unit to connect this unit and the TV, use a commercially available video cable.