Rheem RARL-JEC Installation Instructions - Page 23
FAULT RECALL, Clear Fault History TEST and SW2 Buttons
View all Rheem RARL-JEC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
COMFORT CONTROL2 SYSTEM™ CONTROL WIRING • When entering FAULT RECALL mode, the ICC will automatically scroll through stored faults on the dual 7-segment LEDs. • Each fault is displayed one time with the top right-hand segment of the dual 7segment display activated between faults. • Each fault is displayed with the most recent fault displayed first. • A maximum of six individual faults can be stored • A maximum of three consecutive identical faults are stored. • A "0" will be displayed with no faults are stored • The ICC will automatically exit the FAULT RECALL mode after displaying stored faults Clear Fault History (TEST and SW2 Buttons) • Clear FAULT HISTORY by pressing both TEST and SW2 button for five (5) sec- onds with insulated probes and release. • The top and bottom segments of the dual 7-segment LEDs flash to indicate the history has been cleared. Fault history is cleared with the top and bottom LED segments flash NOTE: The memory card for the system has specific shared data for this system. The memory card is attached to the control box with a tether. The tether has an identification tag that can be used to identify the memory card. For the system data faults d1 through d8 reference the label on the memory card tether. 23