Ricoh Aficio MP C2050 User Manual - Page 23

PaperCut - Ricoh Embedded Manual Revision: 19 2012-10-26 4 Configuration After completing the Installation section and registering the device with PaperCut, it will have been configured with reasonable default settings that are suitable for most environments. This section covers how to change the default settings. All the following settings are available via the device's 'Summary' tab in the PaperCut administration interface. 4.1 Device Function The device function setting defines which functions will be available on the device and how it will be used. Not all function settings are supported on all devices. Each device function is discussed in the following table. Device Function Description Track & control copying The device will be available for tracking walk-up off-the-glass copying. Enable release Station The device will be available as a print release station. Track & control scanning The device will be available for tracking scanning. (supported on devices supporting SDK 4 or higher) Track & control faxing The device will be available for tracking faxing. (Supported on devices supporting SDK 4 or higher. See section 6 for more information.) 4.2 Authentication Methods PaperCut supports a number of different ways to authenticate users who walk-up to the devices to perform copying. The default authentication method is username and password authentication. The available authentication methods can be modified in the 'External Device Settings -> Authentication methods' section. Copyright © 2012 PaperCut Software International Pty. Ltd., All Rights Reserved. 23 of 41