Ricoh Aficio MP C2050 User Manual - Page 35

PaperCut - Ricoh Embedded Manual Revision: 19 2012-10-26 A. Appendix: Supported Authentication Card Readers The list of officially supported card readers from Ricoh are: Card Type Manufacturer Model HID RFIDeas, Inc. RDR-6081-AKU Indala / Motorola RFIDeas, Inc. RDR-6381-AKU Casi-Rusco RFIDeas, Inc. RDR-6281-AKU NexWatch RFIDeas, Inc. RDR-6N81-AKU iClass / Mifare (*) RFIDeas, Inc. RDR-7081-AKU Mifare (*) RFIDeas, Inc. RDR-7581-AKU Legic Interflex IF/72 (USB/RS232) Swipe / Magstripe Tysso TMSR-33-U-SB Swipe / Magstripe Magtek USB reader Swipe / Magstripe RFIdeas pcSwipe magstripe reader (Requires reader configuration, see note below). Mifare/HID/HID-iClass/Multi Elatec ISO/Multi 125/LEGIC TWN3 reader (different model for each card reader type) * ISO 14443, Type A - read only; MIFARE Standard serial number Other card readers may be supported. Please contact PaperCut support for assistance. 7.1 Configuring Swipe Card Readers Supporting Card Reader authentication is as easy as: 1. Connecting a supported card reader to the device via the USB port (Note: On some devices this is hidden under a sticker on the side panel). 2. Enabling Swipe card as an Authentication method under the device's configuration in PaperCut's web interface. 3. Ensure the card number, as read by the reader, is loaded into the Card Number field in the PaperCut database (or consider using user self-association). Swipe cards contain numbers used to identify users according to the card number configured in the User Details screen under "Card/Identity" number. Some readers report information in addition to the number encoded on the card, such as checksums. PaperCut can treat these cases in three ways: Card Number Needs No Conversion Copyright © 2012 PaperCut Software International Pty. Ltd., All Rights Reserved. 35 of 41