Ricoh Aficio MP W3600 Network Guide - Page 75
dhcp, Domain name selection
View all Ricoh Aficio MP W3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Remote Maintenance by telnet dhcp Use the "dhcp" command to configure DHCP settings. ❖ View settings The following command displays the current DHCP settings. msh> dhcp 2 ❖ Configuration You can configure DHCP. msh> dhcp "interface_name" {on|off} • Click {on} to enable dhcp. Click {off} to disable DHCP. • If the DNS server address and domain name are obtained from DHCP, be sure to click {on}. • wlan can be specified only when the IEEE 802.11 interface is installed. ether wlan Interface name Interface configured Ethernet interface IEEE 802.11 interface ❖ Current interface priority configuration display msh> dhcp priority ❖ Interface priority configuration msh> dhcp priority "interface_name" • You can select which interface has DHCP parameter priority. • Priority settings are available when multiple interfaces are installed. ❖ DNS server address selection msh> dhcp dnsaddr {dhcp | static} • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user. • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static". ❖ Domain name selection msh> dhcp domainname {dhcp | static} • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user. • To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static". Reference p.121 "Using DHCP" p.69 "dns" p.70 "domainname" 67