Ricoh C221N Administration Guide - Page 101

Replacing Consumables Replacing the Waste Toner Bottle R WARNING: • Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame. • Wait at least 30 minutes after disconnecting the power plug before re- moving the transfer unit. • Do not incinerate used toner or toner containers. Toner dust might ig- nite when exposed to an open flame. Dispose used toner containers in accordance with local regulations. R CAUTION: • The inside of this printer becomes very hot. Do not touch parts labelled "v" (indicating a hot surface). • Keep toner (used or unused) and toner containers out of reach of children. 5 ❖ When to replace the waste toner bottle If the Alert indicator lights up and the message "Waste Toner Bottle Full. The Waste Toner Bottle is full. Open the indicated cover, and then replace the Waste Toner Bottle. Front Cover : [Waste Toner Bottle]." appears on the Smart Organizing Monitor dialog box, replace the waste toner bottle. Important ❒ Waste toner bottles cannot be reused. ❒ Purchasing and storing extra waste toner bottles are recommended. ❒ When removing the waste toner bottle, make sure not to tilt it. ❒ Keep the waste toner bottle horizontal as you take it out. ❒ Make sure the transfer unit is installed. If the transfer unit is not installed, install it before turning the power on. ❒ Cooperate with the waste toner bottle Recycling Program, whereby used waste toner bottles are collected for recycling. 56