Ricoh C221N Administration Guide - Page 278
TCP/IP, CP/BOOTP server.
UPC - 026649060083
View all Ricoh C221N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
Printer Configuration TCP/IP ❖ IP Address This device's network IP address. Enter it in the following format: "xxx.xxx.xxx.xxx" (replace "x" with the appropriate numbers, for example: "123.123.123.123"). ❖ Subnet Mask Specify the part of the IP address used as the subnet mask. Enter it in the following format: "xxx.xxx.xxx.xxx" (replace "x" with the appropriate numbers, for example: "123.123.123.123"). ❖ Default Gateway Address Enter the default gateway address. The default gateway address is the IP address of the host or router used as the gateway when communicating (printing or exchanging information) with a computer on another network. ❖ DHCP/BOOTP Select [On] to automatically configure the network settings using the DHCP/BOOTP server. Select [Off] to configure the network settings manually. If DHCP/BOOTP is active, all TCP/IP settings are obtained automatically from the DHCP/BOOTP server. ❖ DNS Server IP Address Enter the DNS Server IP address in the following format: "xxx.xxx.xxx.xxx" (replacing "x" with the appropriate numbers, for example: "123.123.123.123"). ❖ DNS Domain Name Enter the domain name, using up to 32 alphanumeric characters. 9