Ricoh C221N Administration Guide - Page 273

Using Smart Organizing Monitor under the Macintosh Environment Tray Priority ❖ Default Tray Select the tray used for the priority paper source. "Tray Priority" is the tray selected immediately after the printer is turned on, and when Auto Select is chosen as the paper source for a job. Bypass Tray ❖ Paper Size In the [Paper Size] list, select the size of paper loaded in the input tray. When [Custom Paper Size] is selected, specify the size in [Custom Paper Size]. ❖ Paper Type In the [Paper Type] list, select the paper type. ❖ Custom Paper Size • Unit Select which units (inch or mm) to use for entering lengths in the [Horizontal] and [Vertical] boxes. • Horizontal and Vertical Enter the custom paper size when [Custom Paper Size] is selected. In the units selected earlier (inch or mm), enter the length of the paper's short and long edges in the [Horizontal] and [Vertical] boxes respectively. Note ❒ Available paper sizes vary depending on the paper tray. For details about setting the paper size, see the printer operating instructions. 4