Ricoh P C200W Users Guide - Page 100
Step 1, Step 2, Step 3, Step 4, Notes, Settings, Paper, Tray Configuration, Paper Size/Type, Step 5
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Troubleshoot a problem 100 Action Step 1 1 Check if the paper loaded is supported. Note: If paper is not supported, then load a supported paper. 2 Print the document. Yes Go to step 2. No The problem is solved. Is the paper curled? Step 2 1 Check if the printer is using a genuine and supported toner cartridge. Note: If the cartridge is not supported, then install a supported one. 2 Print the document. Go to step 3. The problem is solved. Is the paper curled? Step 3 1 Adjust the guides in the tray to the correct position for the paper loaded. 2 Print the document. Go to step 4. The problem is solved. Is the paper curled? Step 4 1 Depending on your operating system, specify the paper size and paper type from the Printing Preferences or Print dialog. Notes: • Make sure that the settings match the paper loaded. • You can also change the setting on the printer control panel. Navigate to Settings > Paper > Tray Configuration > Paper Size/Type. Press to navigate through the settings. 2 Print the document. Go to step 5. The problem is solved. Is the paper curled? Step 5 1 Remove paper, flip it over, and then reload paper. 2 Print the document. Go to step 6. The problem is solved. Is the paper curled?