Ricoh P C200W Users Guide - Page 95
Step 3, Notes, Settings, Paper, Tray Configuration, Size/Type, Step 4, Step 5, Step 6
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Troubleshoot a problem Action Step 3 1 Depending on your operating system, specify the paper type from the Printing Preferences or Print dialog. Notes: • Make sure that the setting matches the paper loaded. • You can also change the setting on the printer control panel. Navigate to Settings > Paper > Tray Configuration > Paper Size/Type. 2 Print the document. Yes Go to step 4. Is the print light? Step 4 Check if paper has texture or rough finishes. Go to step 5. Are you printing on textured or rough paper? Step 5 1 Replace textured or rough paper with plain paper. 2 Print the document. Go to step 7. Is the print light? Step 6 1 Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you are ready to use it. 2 Print the document. Go to step 7. Is the print light? 95 No The problem is solved. Go to step 7. The problem is solved. The problem is solved.