Ricoh P C200W Users Guide - Page 51
PostScript
![]() |
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Use printer menus 51 Advanced Imaging Menu item Description Color Balance Cyan -5 to 5 (0*) Magenta -5 to 5 (0*) Yellow -5 to 5 (0*) Black -5 to 5 (0*) Reset Defaults Adjust the amount of toner that is used for each color. Color Correction Color Correction Auto* Off Manual Color Correction Content Modify the color settings used to print documents. Notes: • Off sets the printer to receive the color correction from the software. • Auto sets the printer to apply different color profiles to each object on the printed page. • Manual allows the customization of the RGB or CMYK color conversions applied to each object on the printed page. • Color Correction Content is available only when Color Correction is set to Manual. Color Adjust Calibrate the printer to adjust color variations in the printed output. Note: An asterisk (*) next to a value indicates the factory default setting. PostScript Menu item Print PS Error On Off* Minimum Line Width 1-30 (2*) Lock PS Startup Mode On* Off Description Print a page that describes the PostScript error. Note: When an error occurs, processing of the job stops, the printer prints an error message, and the rest of the print job is flushed. Set the minimum stroke width. Note: Jobs printed in 4800 CQ use half the value. Disable the SysStart file. Note: The default setting varies depending on the printer model.
![](/manual_guide/products/ricoh-p-c200w-users-guide-c05f877/51.png)