Ricoh P C200W Users Guide - Page 63
TCP/IP, Allow DHCP/BOOTP to update
![]() |
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Use printer menus 63 Menu item Description PS SmartSwitch On* Off* Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Mac Binary PS Auto* On Off Set the printer to process Macintosh binary PostScript print jobs. Notes: • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Energy Efficient Ethernet Off On Auto* Reduce power consumption when the printer does not receive data from the Ethernet network. Note: An asterisk (*) next to a value indicates the factory default setting. TCP/IP Note: This menu appears only in network printers or printers attached to print servers. Menu item Description Set Hostname Set the current TCP/IP host name. Domain Name Set the domain name. Note: This menu item appears only in some printer models. Allow DHCP/BOOTP to update NTP server On* Off Allow the DHCP and BOOTP clients to update the NTP settings of the printer. Zero Configuration Name Specify a service name for the zero configuration network. Note: This menu item appears only in some printer models. Enable Auto IP On* Off Assign an IP address automatically. DNS Address Specify the current Domain Name System (DNS) server address. Backup DNS Address Specify the backup DNS server addresses. Backup DNS Address 2 Backup DNS Address 3
![](/manual_guide/products/ricoh-p-c200w-users-guide-c05f877/63.png)