Ricoh P C200W Users Guide - Page 88
Step 2, Settings, Print, Quality, Toner Darkness, Notes, Paper, Tray Configuration, Paper Size/Type
![]() |
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Troubleshoot a problem 88 Action Yes Step 2 1 Depending on your operating system, reduce toner darkness from the Printing Preferences or Print dialog. Note: You can also change the setting on the printer control panel. Navigate to: Settings > Print > Quality > Toner Darkness 2 Print the document. Go to step 3. No The problem is solved. Is the print too dark? Step 3 1 Depending on your operating system, specify the paper type from the Printing Preferences or Print dialog. Notes: • Make sure that the setting matches the paper loaded. • You can also change the setting on the printer control panel. Navigate to: Settings > Paper > Tray Configuration > Paper Size/Type 2 Print the document. Go to step 4. The problem is solved. Is the print too dark? Step 4 Check if the paper has texture or rough finishes. Go to step 5. Go to step 6. Are you printing on textured or rough paper? Step 5 1 Replace textured or rough paper with plain paper. 2 Print the document. Go to step 6. The problem is solved. Is the print too dark? Step 6 1 Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you are ready to use it. 2 Print the document. Contact customer support. The problem is solved. Is the print too dark?
![](/manual_guide/products/ricoh-p-c200w-users-guide-c05f877/88.png)