Ricoh P C200W Users Guide - Page 28
Networking, Connecting the printer to a Wi-Fi network
![]() |
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Set up, install, and configure 28 Networking Connecting the printer to a Wi-Fi network Note: This feature is available only in some printer models. Before you begin, make sure that: • Active Adapter is set to Auto. From the control panel, navigate to: Settings > Network/Ports > Network Overview > Active Adapter Press to navigate through the settings. • The Ethernet cable is not connected to the printer. Using the Settings menu in the printer 1 From the control panel, navigate to: Settings > Network/Ports > Wireless > Setup On Printer Panel Press to navigate through the settings. 2 Select a Wi-Fi network, and then type the network password. Note: For Wi-Fi-network-ready printer models, a prompt to set up the Wi-Fi network appears during initial setup. Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS) Note: This feature is available only in some printer models. Before you begin, make sure that: • The access point (wireless router) is WPS-certified or WPS-compatible. For more information, see the documentation that came with your access point. • A wireless network adapter is installed in your printer. For more information, see the instructions that came with the adapter. • Active Adapter is set to Auto. From the control panel, navigate to: Settings > Network/Ports > Network Overview > Active Adapter Press to navigate through the settings. Using the Push Button method 1 From the control panel, navigate to: Settings > Network/Ports > Wireless > Wi-Fi Protected Setup > Start Push Button Method Press to navigate through the settings. 2 Follow the instructions on the display.
![](/manual_guide/products/ricoh-p-c200w-users-guide-c05f877/28.png)