Ryobi RMX001 Operation Manual - Page 19

Troubleshooting

Get Ryobi RMX001 PDF manuals and user guides View all Ryobi RMX001 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Mixer won't start Power supply not connected Connect to power supply. On/off switch is in the off position Put on/off switch in on position. Motor overloaded and circuit breaker Allow motor to cool, press the circuit is tripped breaker reset button and put on/off switch in on position. NOTE: If the mixer still does not start, unplug the tool and empty some or all of the batch load. Do not force the mixer. Mixer stops during operation Power supply is disconnected Reconnect power supply. Motor overloaded and circuit breaker Allow motor to cool, press the circuit is tripped breaker reset button and put on/off switch in on position. NOTE: If the mixer still does not start, unplug the tool and empty some or all of the batch load. Do not force the mixer. Excessive noise or vibration while Pivot pin and/or lock handle is not secure Stop the motor and fully insert the pivot drum is spinning pin and/or lock handle to lock the drum in place. Drum lowers unexpectedly during Pivot pin and/or lock handle is not secure Stop the motor and fully insert the pivot operation pin and/or lock handle to lock the drum in place. 19 − English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
19 − English
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Mixer won’t start
Power supply not connected
On/off switch is in the off position
Motor overloaded and circuit breaker
is tripped
Connect to power supply.
Put on/off switch in on position.
Allow motor to cool, press the circuit
breaker reset button and put on/off switch
in on position.
NOTE:
If the mixer still does not start,
unplug the tool and empty some or all of
the batch load.
Do not force the mixer.
Mixer stops during operation
Power supply is disconnected
Motor overloaded and circuit breaker
is tripped
Reconnect power supply.
Allow motor to cool, press the circuit
breaker reset button and put on/off switch
in on position.
NOTE:
If the mixer still does not start,
unplug the tool and empty some or all of
the batch load.
Do not force the mixer.
Excessive noise or vibration while
drum is spinning
Pivot pin and/or lock handle is not secure
Stop the motor and fully insert the pivot
pin and/or lock handle to lock the drum
in place.
Drum lowers unexpectedly during
operation
Pivot pin and/or lock handle is not secure
Stop the motor and fully insert the pivot
pin and/or lock handle to lock the drum
in place.