Ryobi RMX001 Operation Manual - Page 5

SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury. NOTICE: (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage). Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read Operator's Manual Eye and Breathing Protection To reduce the risk of injury, user must read and understand operator's manual before using this product. Always wear eye protection with side shields marked to comply with ANSI Z87.1 along with breathing protection when operating this equipment. Wet Conditions Alert Do not expose to rain or use in damp locations. Entanglement Hazard Risk of loose clothing, long hair, and body parts being drawn into spinning drum. Pinch Point Always watch for potential areas where pinching could occur. V A Hz min no .../min Electrocution Volts Amperes Hertz Minutes Alternating Current No Load Speed Per Minute Failure to properly ground can result in electrocution. Voltage Current Frequency (cycles per second) Time Type of current Rotational speed, at no load Revolutions, strokes, surface speed, orbits etc., per minute 5 − English