Samsung ML-2251N User Manual (ENGLISH) - Page 176
change the memory value in the printer properties as you have, installed., Using Windows PostScript
UPC - 635753622713
View all Samsung ML-2251N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
6 Hold the PS DIMM so that the notch and the connection point are aligned with the slot as shown, and insert it all the way into the lower slot. 7 Close the control board cover. 8 Tighten the two screws. 9 Reconnect the power cord and printer cable, and turn the printer on. NOTES: • If you are using the printer as a PostScript device, you need to change the memory value in the printer properties as you have installed. • For PS printing on a Windows system, refer to Appendix A, "Using Windows PostScript Driver." D INSTALLING PRINTER OPTIONS D.5
I
NSTALLING
P
RINTER
O
PTIONS
D.
5
D
6
Hold the PS DIMM so that the notch and the connection
point are aligned with the slot as shown, and insert it all the
way into the lower slot.
7
Close the control board cover.
8
Tighten the two screws.
9
Reconnect the power cord and printer cable, and turn the
printer on.
N
OTES
:
• If you are using the printer as a PostScript device, you need to
change the memory value in the printer properties as you have
installed.
• For PS printing on a Windows system, refer to Appendix A,
"Using Windows PostScript Driver."