Samsung ML 3051N User Manual (ENGLISH) - Page 56
Installing accessories, Precautions when installing accessories, Installing a memory DIMM - ml 3051nd laser printer
UPC - 635753624243
View all Samsung ML 3051N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
10 Installing accessories Your printer is a full-featured laser printer that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several accessories available to enhance the printer's capabilities. This chapter includes: • Precautions when installing accessories • Installing a memory DIMM • Installing a wireless network interface card Precautions when installing accessories Disconnect the power cord: Never remove the control board cover while the power is being supplied. To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external accessories. Discharge static electricity: The control board and internal accessories (network interface card and memory DIMM) are sensitive to static electricity. Before installing or removing an internal accessories, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk round before finishing installation, discharge any static electricity once again. Installing a memory DIMM Your printer has a dual in-line memory module (DIMM) slot. Use this DIMM slot to install additional memory. The ML-3050 has 16 MB of memory which can be expanded to 272 MB. The ML-3051N and ML-3051ND have 64 MB of memory which can be expanded to 320 MB. For order information for optional memory DIMMs, see page 7.1. 1 Turn the printer power off and unplug all cables from the printer. 2 Grasp the control board cover and slide toward you to open it. 1 1 control board cover 3 Completely open the latch on each side of the DIMM slot. 1 1 latch 4 Take out a new memory DIMM from the plastic bag. 5 Holding the memory DIMM by the edges, align the notches on the memory DIMM with the grooves on the memory DIMM slot. 10.1