Samsung SCH A870 User Manual (ENGLISH) - Page 43

SETTINGS & TOOLS, Tools, Voice Commands, Voice Settings, Digit Dialing, Reset Digits

Page 43 highlights

VoiceSignal® 7. Your phone displays the first digit sequence and "Please say" plays through the speaker followed by the four digits appearing in the display. Wait for the beep and repeat the digits using your normal tone of voice. 8. After a moment, the phone plays back the recording and prompts "Did the recording sound ok?" If the recording was good, say "Yes." If you need to re-record, say "No." If you say "No," the phone prompts you to pronounce the digits again. Wait for the beep and then re-record. Repeat this step until you're satisfied with the recording. 9. After confirming that the recording sounds ok, repeat the recording process with the next set of digits. After ten sets of digits, the phone indicates that adaptation is complete. Reset Digit Dial Adaptation This option erases an adaptation and resets Digit Dial to its original state. 1. At the standby screen, press MENU. Use the right navigation key to highlight SETTINGS & TOOLS. 2. Press Tools, then Voice Commands. 3. Press Voice Settings, then Digit Dialing. 4. Highlight Reset Digits and press . The Reset Digit Adaptation screen displays requesting confirmation of reset. Section 3: Call Functions 43 Section 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Section 3: Call Functions
43
VoiceSignal®
Section 3
7.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
Wait for the beep and repeat the digits using your normal
tone of voice.
8.
After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
9.
After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After ten
sets of digits, the phone indicates that adaptation is
complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1.
At the standby screen, press
MENU
. Use the right
navigation key to highlight
SETTINGS & TOOLS
.
2.
Press
Tools
, then
Voice Commands
.
3.
Press
Voice Settings
, then
Digit Dialing
.
4.
Highlight
Reset Digits
and press
. The Reset
Digit Adaptation screen displays requesting confirmation
of reset.