Samsung SCX 5115 User Manual (ENGLISH) - Page 132
Dynamic Addressing BOOTP/DHCP, Mode/Enter, Enter, Stop/Clear, Menu/Exit, System Setup
View all Samsung SCX 5115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
10 Enter a number between 0 and 255 for each byte and press Mode/Enter (Enter for SCX-5115). You can move between each byte by pressing or . 11 Repeat steps 6 through 8 to configure the other TCP/IP parameters, such as subnet mask and gateway. 12 When you are finished, press Stop/Clear. Dynamic Addressing (BOOTP/DHCP) To allow the server to automatically assign the TCP/IP address, take the following steps: 1 Press Menu/Exit and then System Setup on the one- touch dial keypad. SCX-5115 users should press Menu and then Enter. 2 Press or to display "NETWORK SETUP" on the top line. 3 Press or to display "CONFIG NETWORK" on the bottom line. 4 Press Mode/Enter (Enter for SCX-5115) to access the menu. A The first option, "CONFIGURE TCP" displays on the bottom line. 5 Press Mode/Enter (Enter for SCX-5115) to access the menu. 6 Press or to select the server to assign the TCP/IP address, DHCP or BOOTP. 7 Press Mode/Enter (Enter for SCX-5115) to save the selection. 8 When you are finished, press Stop/Clear. INSTALLING A NETWORK OPTION A.9